Skip to content

GitLab

Home · Changes

Page history
Update home authored by Wouter Jansen's avatar Wouter Jansen
Hide whitespace changes
Inline Side-by-side
home.md
View page @ a781dc4e
......@@ -4,6 +4,7 @@
- [Classes](#classes)
- [RTISMeasurement](#rtismeasurement)
- [RTISSettings](#rtissettings)
- [TimeStampRecorderProcess](#timestamprecorderprocess)
- [MeasureExternalTriggerQueueThread](#measureexternaltriggerqueuethread)
- [MeasureExternalTriggerCallbackThread](#measureexternaltriggercallbackthread)
- [Methods](#methods)
......@@ -44,37 +45,64 @@ Here is a small example that goes over most basic steps:
import rtisdev
import matplotlib.pyplot as plt
import numpy as np
```
Open a connection to the RTIS Device over the default serial port:
# Open a connection to the RTIS Device over the default serial port.
```python
success_connect = rtisdev.open_connection()
```
Set the default recording settings with 163840 samples and a call sweep between 25 and 50 KHz:
# Set the default recording settings with 163840 samples and a call sweep between 25 and 50 KHz.
```python
success_settings_record = rtisdev.set_recording_settings(premade="default_25_50")
```
Enable all processing steps and preload them with RTIS CUDA. This will produce a 2D energyscape with 181 directions
with a maximum distance of 5m:
# Enable all processing steps and preload them with RTIS CUDA. This will produce a 2D energyscape with 181 directions
# with a maximum distance of 5m.
```python
success_settings_processing = rtisdev.set_processing_settings(premade="2D_5m_181")
```
# Get the used settings as a RTISSettings object.
Get the used settings as a RTISSettings object:
```python
settings = rtisdev.get_current_settings()
```
# Get an ACTIVE measurement (protect your ears!) in raw data.
Get an ACTIVE measurement (protect your ears!) in raw data:
```python
measurement = rtisdev.get_raw_measurement(True)
```
Store the raw data of that measurement as a binary file. This can be opened in another application for further work:
# Store the raw data of that measurement as a binary file. This can be opened in another application for further work.
```python
raw_data_sonar = measurement.rawData.tobytes()
file_handle_data = open("test_measurement_" + str(measurement.index) + ".bin", "wb")
file_handle_data.write(raw_data_sonar)
file_handle_data.close()
```
# Process that raw measurement to an energyscape using the configuration chosen earlier.
Process that raw measurement to an energyscape using the configuration chosen earlier:
```python
processed_measurement = rtisdev.process_measurement(measurement)
```
# Get a new ACTIVE measurement (protect your ears!) in both raw and processed data formats directly.
Get a new ACTIVE measurement (protect your ears!) in both raw and processed data formats directly:
```python
new_processed_measurement = rtisdev.get_processed_measurement(True)
plt.imshow(np.transpose(new_processed_measurement.processedData), cmap="hot", interpolation='nearest')
```
Plot the 2D energyscape of this processed measurement using matplotlib:
# Plot the 2D energyscape of this processed measurement using matplotlib.
```python
plt.xlabel("Directions (degrees)")
plt.ylabel("Range (meters)")
indexes_x = np.arange(0, new_processed_measurement.processedData.shape[0], 20)
......@@ -90,11 +118,17 @@ ax = plt.gca()
ax.invert_yaxis()
ax.set_aspect("auto")
plt.show()
```
# Get a new ACTIVE measurement (protect your ears!) in both raw and microphone signal format directly.
Get a new ACTIVE measurement (protect your ears!) in both raw and microphone signal format directly:
```python
signal_measurement = rtisdev.get_signal_measurement(True)
```
# Plot the microphone signals of this measurement.
Plot the microphone signals of this measurement:
```python
fig, axs = plt.subplots(8, 4, figsize=(10,16), constrained_layout = True)
for microphone_index_i in range(0, 8):
for microphone_index_j in range(0, 4):
......@@ -117,7 +151,7 @@ fig.suptitle("RTIS Dev - Microphone Signals")
## **RTISMeasurement**
<p class="func-header">
<i>class</i> <b>RTISMeasurement</b>(<i>id: str='', timestamp: float=0, behaviour: bool=False, index: int=0, rawData: np.ndarray=None, processedData: np.ndarray=None</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L320">[source]</a>
<i>class</i> <b>RTISMeasurement</b>(<i>id: str='', timestamp: float=0, behaviour: bool=False, index: int=0, rawData: np.ndarray=None, processedData: np.ndarray=None</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L368">[source]</a>
</p>
Class storing all data and information on an RTIS device measurement.
......@@ -159,7 +193,7 @@ Class storing all data and information on an RTIS device measurement.
## **RTISSettings**
<p class="func-header">
<i>class</i> <b>RTISSettings</b>(<i>firmwareVersion, configName=''</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L389">[source]</a>
<i>class</i> <b>RTISSettings</b>(<i>firmwareVersion, configName=''</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L438">[source]</a>
</p>
Class describing all the processing and recording settings related to RTIS devices.
......@@ -174,41 +208,57 @@ Can be converted to a dictionary.
</table>
## **MeasureExternalTriggerQueueThread**
<p class="func-header">
<i>class</i> <b>MeasureExternalTriggerQueueThread</b>(<i>*args, **kwargs</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L544">[source]</a>
<i>class</i> <b>MeasureExternalTriggerQueueThread</b>(<i>*args, **kwargs</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L662">[source]</a>
</p>
The class based on a Multiprocessing Process to start RTIS sonar measurements triggered by an external trigger.
To set the data queue correctly use `set_queue(dataQueue)` function.
the [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtismeasurement) objects will then be put on this queue.
To start the process use the `start()` function. To stop use the `stop_thread()` function.
By default using a `signal.SIGINT` exit (ex. using <kbd>CTRL</kbd>+<kbd>C</kbd>) will gracefully end the script.
By default, using a `signal.SIGINT` exit (ex. using <kbd>CTRL</kbd>+<kbd>C</kbd>) will gracefully end the script.
Use [`create_measure_external_trigger_queue(dataQueue)`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#create_measure_external_trigger_queue) to make an easy to use the class.
<table class="docutils field-list field-table" frame="void" rules="none">
<col class="field-name" />
<col class="field-body" />
<tbody valign="top">
</table>
## **MeasureExternalTriggerCallbackThread**
<p class="func-header">
<i>class</i> <b>MeasureExternalTriggerCallbackThread</b>(<i>*args, **kwargs</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L688">[source]</a>
<i>class</i> <b>MeasureExternalTriggerCallbackThread</b>(<i>*args, **kwargs</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L823">[source]</a>
</p>
The class based on a Multiprocessing Process to start RTIS sonar measurements triggered by an external trigger.
To set the callback function correctly use `set_callback(callback)` function.
Your callback function should only have one argument, the [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtismeasurement) data package.
To start the process use the `start()` function. To stop use the `stop_thread()` function.
By default using a `signal.SIGINT` exit (ex. using <kbd>CTRL</kbd>+<kbd>C</kbd>) will gracefully end the script.
By default, using a `signal.SIGINT` exit (ex. using <kbd>CTRL</kbd>+<kbd>C</kbd>) will gracefully end the script.
Use [`create_measure_external_trigger_callback(save_callback)`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#create_measure_external_trigger_callback) to make an easy to use the class.
<table class="docutils field-list field-table" frame="void" rules="none">
<col class="field-name" />
<col class="field-body" />
<tbody valign="top">
</table>
# **Methods**
## **open_connection**
<p class="func-header">
<i>def</i> <b>open_connection</b>(<i>port: string='/dev/ttyACM0', allowDebugMode: bool=False </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2199">[source]</a>
<i>def</i> <b>open_connection</b>(<i>port: string='/dev/ttyACM0', allowDebugMode: bool=False </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2455">[source]</a>
</p>
Connect to the port of the RTIS Hardware.
......@@ -225,7 +275,7 @@ Connect to the port of the RTIS Hardware.
</p>
<b>allowDebugMode : <i>bool (default = False)</i></b>
<p class="attr">
When enabled, if a connection can not be made to a real RTIS Device to the chosen port, it will instead automatically go into a debug mode where a virtual RTIS device is used instead of throwing a exception. This is mostly for debugging and testing of the library.
When enabled, if a connection can not be made to a real RTIS Device to the chosen port, it will instead automatically go into a debug mode where a virtual RTIS device is used instead of throwing an exception. This is mostly for debugging and testing of the library.
</p></td>
</tr>
<tr class="field">
......@@ -243,7 +293,7 @@ Connect to the port of the RTIS Hardware.
## **close_connection**
<p class="func-header">
<i>def</i> <b>close_connection</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2260">[source]</a>
<i>def</i> <b>close_connection</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2559">[source]</a>
</p>
Manually close the connection to the RTIS device.
......@@ -269,7 +319,7 @@ be closed gracefully.
## **set_recording_settings**
<p class="func-header">
<i>def</i> <b>set_recording_settings</b>(<i>premade: str=None, jsonPath: str=None, callCustom: str=None, microphoneSamples: int=163840, microphoneSampleFrequency: int=4500000, callSampleFrequency: int=450000, callDuration: float=2.5, callMinimumFrequency: int=25000, callMaximumFrequency: int=50000, callEmissions: int=1, configName: str= '', applyToDevice: bool=True</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2289">[source]</a>
<i>def</i> <b>set_recording_settings</b>(<i>premade: str=None, jsonPath: str=None, callCustom: str=None, microphoneSamples: int=163840, microphoneSampleFrequency: int=4500000, callSampleFrequency: int=450000, callDuration: float=2.5, callMinimumFrequency: int=25000, callMaximumFrequency: int=50000, callEmissions: int=1, configName: str= '', applyToDevice: bool=True</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2592">[source]</a>
</p>
Set the recording settings. All parameters are optional and most have default values.
......@@ -303,7 +353,7 @@ Please read their decription carefully.
</p>
<b>callSampleFrequency : <i>int (default = 450000)</i></b>
<p class="attr">
The chosen sample frequency of the call. Must by larger then 160 KHz and smaller then 2 MHz.
The chosen sample frequency of the call. Must be larger than 160 KHz and smaller than 2 MHz.
</p>
<b>callDuration : <i>float (default = 2.5)</i></b>
<p class="attr">
......@@ -342,9 +392,8 @@ Please read their decription carefully.
#### Examples
Create settings from a premade setup.
You can get the available premade settings with [`get_premade_recording_settings_list()`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#get_premade_processing_settings_list).
Create settings from a premade setup:
```python
rtisdev.set_recording_settings(premade="short_20_80")
```
......@@ -352,16 +401,18 @@ rtisdev.set_recording_settings(premade="short_20_80")
Create settings from a json file.
This expects a json to be available with a format such as seen below.
Here we use auto-generated pulse call to emit.
More examples can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/recording/).
An example json:
```json
{
"microphoneSamples" : 294912,
"microphoneSampleFrequency" : 4500000,
"callSampleFrequency" : 450000,
"callDuration" : 2.5,
"callMinimumFrequency" : 25000,
"callMaximumFrequency" : 50000,
"callEmissions": 1
"microphoneSamples" : 294912,
"microphoneSampleFrequency" : 4500000,
"callSampleFrequency" : 450000,
"callDuration" : 2.5,
"callMinimumFrequency" : 25000,
"callMaximumFrequency" : 50000,
"callEmissions": 1
}
```
......@@ -373,15 +424,15 @@ Create settings from a json file.
This expects a json to be available with a format such as seen below.
Here we use manually generated call.
It has to be available on the given path and have the right format.
An example of such a custom call can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/recording/flutter.csv).
An example of such a custom call can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/recording/flutter.csv):
```json
{
"microphoneSamples" : 16777216,
"microphoneSampleFrequency" : 4500000,
"callSampleFrequency" : 450000,
"callCustom": "mycall.csv",
"callEmissions": 1
"microphoneSamples" : 16777216,
"microphoneSampleFrequency" : 4500000,
"callSampleFrequency" : 450000,
"callCustom": "mycall.csv",
"callEmissions": 1
}
```
......@@ -389,15 +440,14 @@ An example of such a custom call can be found [here](https://cosysgit.uantwerpen
rtisdev.set_recording_settings(jsonPath="./myrecordingsettings.json")
```
Create full custom settings with the arguments. All arguments that aren't filled in will use default values.
Create full custom settings with the arguments. All arguments that aren't filled in will use default values:
```python
rtisdev.set_processing_settings(microphoneSamples=294912, callDuration=3, callMinimumFrequency=25000,
callMaximumFrequency=80000)
rtisdev.set_processing_settings(microphoneSamples=294912, callDuration=3, callMinimumFrequency=25000, callMaximumFrequency=80000)
```
Load in manually generated call. This requires the file to exist on the path and have the right format.
An example of such a custom call can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/recording/flutter.csv).
An example of such a custom call can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/recording/flutter.csv):
```python
rtisdev.set_processing_settings(callCustom="mycall.csv")
......@@ -406,7 +456,7 @@ rtisdev.set_processing_settings(callCustom="mycall.csv")
## **set_processing_settings**
<p class="func-header">
<i>def</i> <b>set_processing_settings</b>(<i>premade: str=None, jsonPath: str=None, customPath: str=None, microphoneLayout: str='eRTIS_v3D1', mode: int=1, directions: int=181, minRange: float=0.5, maxRange: float=5, microphoneSampleFrequency: int=4500000, pdmEnable: bool=True, matchedFilterEnable: bool=True, beamformingEnable: bool=True, enveloppeEnable: bool=True, cleanEnable: bool=True, preloadToggle: bool =True</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2475">[source]</a>
<i>def</i> <b>set_processing_settings</b>(<i>premade: str=None, jsonPath: str=None, customPath: str=None, microphoneLayout: str='eRTIS_v3D1', mode: int=1, directions: int=181, minRange: float=0.5, maxRange: float=5, microphoneSampleFrequency: int=4500000, pdmEnable: bool=True, matchedFilterEnable: bool=True, beamformingEnable: bool=True, enveloppeEnable: bool=True, cleanEnable: bool=True, preloadToggle: bool =True</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2779">[source]</a>
</p>
Set the processing settings. All parameters are optional and most have default values.
......@@ -491,40 +541,39 @@ Please read their decription carefully.
#### Examples
Create settings from a premade setup with all processing steps on.
You can get the available premade settings with [`get_premade_recording_settings_list()`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#get_premade_processing_settings_list).
Create settings from a premade setup with all processing steps on:
```python
rtisdev.set_processing_settings(premade="3D_5m_3000", pdmEnable=True, matchedFilterEnable=True,
beamformingEnable=True, enveloppeEnable=True, cleanEnable=True, preloadToggle=True)
rtisdev.set_processing_settings(premade="3D_5m_3000", pdmEnable=True, matchedFilterEnable=True, beamformingEnable=True, enveloppeEnable=True, cleanEnable=True, preloadToggle=True)
```
You don't have to define all the processing steps, as they are all on by default.
You don't have to define all the processing steps, as they are all on by default:
```python
rtisdev.set_processing_settings(premade="3D_5m_3000")
```
Create settings from a premade setup with only part of the processing steps enabled and no preloading.
You can get the available premade settings with [`get_premade_recording_settings_list()`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#get_premade_processing_settings_list).
You can get the available premade settings with [`get_premade_recording_settings_list()`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#get_premade_processing_settings_list):
```python
rtisdev.set_processing_settings(premade="2D_5m_181", pdmEnable=True, matchedFilterEnable=True,
beamformingEnable=False, enveloppeEnable=False, cleanEnable=False)
rtisdev.set_processing_settings(premade="2D_5m_181", pdmEnable=True, matchedFilterEnable=True, beamformingEnable=False, enveloppeEnable=False, cleanEnable=False)
```
Create settings from a json file with full processing settings on.
This expects a json to be available with a format such as seen below.
Here we use auto-generated processing files.
An example of such json files can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/processing/).
Here we use auto-generated processing files:
```json
{
"microphoneLayout" : "eRTIS_v3D1",
"microphoneSampleFrequency" : 4500000,
"minRange" : 0.5,
"maxRange" : 5,
"directions": 181,
"2D": 1
"microphoneLayout" : "eRTIS_v3D1",
"microphoneSampleFrequency" : 4500000,
"minRange" : 0.5,
"maxRange" : 5,
"directions": 181,
"2D": 1
}
```
......@@ -536,15 +585,15 @@ Create settings from a json file with full processing settings on.
This expects a json to be available with a format such as seen below.
Here we use manually generated processing files.
They have to be available on these paths and have the right format.
An example of such custom processing files can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/processing/).
An example of such custom processing files can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/processing/) as well:
```json
{
"microphoneLayout" : "eRTIS_v3D1",
"microphoneSampleFrequency" : 4500000,
"directionsCustom": "./directions.csv",
"delayMatrixCustom": ".premade/delaymatrix.csv",
"rangesCustom": ".premade/ranges.csv"
"microphoneLayout" : "eRTIS_v3D1",
"microphoneSampleFrequency" : 4500000,
"directionsCustom": "./directions.csv",
"delayMatrixCustom": ".premade/delaymatrix.csv",
"rangesCustom": ".premade/ranges.csv"
}
```
......@@ -552,15 +601,16 @@ An example of such custom processing files can be found [here](https://cosysgit.
rtisdev.set_processing_settings(jsonPath="./myprocessingsettings.json")
```
Create full custom settings with the arguments. All arguments that aren't filled in will use default values.
Create full custom settings with the arguments. All arguments that aren't filled in will use default values:
```python
rtisdev.set_processing_settings(mode = 0, directions = 1337, minRange = 0.5, maxRange = 10)
```
Load in manually generated processing files. This requires 3 files to exist in the given path:
delaymatrix.csv, directions.csv and ranges.csv.
An example of such custom processing files can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/processing/).
delaymatrix.csv, directions.csv and ranges.csv. Don't forget to also perhaps set the microphoneLayout and
microphoneSampleFrequency values correctly as these are absent in these csv files!
An example of such custom processing files can be found [here](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/config/premadeSettings/processing/):
```python
rtisdev.set_processing_settings(customPath="mysettingsfolder")
......@@ -569,7 +619,7 @@ rtisdev.set_processing_settings(customPath="mysettingsfolder")
## **get_current_settings**
<p class="func-header">
<i>def</i> <b>get_current_settings</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2688">[source]</a>
<i>def</i> <b>get_current_settings</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2992">[source]</a>
</p>
Returns the [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtissettings) object of the current settings for processing and recording.
......@@ -593,7 +643,7 @@ Returns the [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-software/rtisde
## **clear_current_settings**
<p class="func-header">
<i>def</i> <b>clear_current_settings</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2705">[source]</a>
<i>def</i> <b>clear_current_settings</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3009">[source]</a>
</p>
Clear the current applied [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtissettings) configuration.
......@@ -610,7 +660,7 @@ Clear the current applied [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-s
## **get_settings**
<p class="func-header">
<i>def</i> <b>get_settings</b>(<i>recordingPremade: str=None, recordingJsonPath: str=None, recordingCallCustom: str=None, processingPremade: str=None, processingJsonPath: str=None, processingCustomPath: str=None, microphoneSamples: int=163840, microphoneSampleFrequency: int=4500000, callSampleFrequency: int=450000, callDuration: float=2.5, callMinimumFrequency: int=25000, callMaximumFrequency: int=50000, callEmissions: int=1, microphoneLayout: str='eRTIS_v3D1', mode: int=1, directions: int=181, minRange: float=0.5, maxRange: float=5, pdmEnable: bool=True, matchedFilterEnable: bool=True, beamformingEnable: bool=True, enveloppeEnable: bool=True, cleanEnable: bool=True, preloadToggle: bool =True, configName: str=''</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2714">[source]</a>
<i>def</i> <b>get_settings</b>(<i>recordingPremade: str=None, recordingJsonPath: str=None, recordingCallCustom: str=None, processingPremade: str=None, processingJsonPath: str=None, processingCustomPath: str=None, microphoneSamples: int=163840, microphoneSampleFrequency: int=4500000, callSampleFrequency: int=450000, callDuration: float=2.5, callMinimumFrequency: int=25000, callMaximumFrequency: int=50000, callEmissions: int=1, microphoneLayout: str='eRTIS_v3D1', mode: int=1, directions: int=181, minRange: float=0.5, maxRange: float=5, pdmEnable: bool=True, matchedFilterEnable: bool=True, beamformingEnable: bool=True, enveloppeEnable: bool=True, cleanEnable: bool=True, preloadToggle: bool =True, configName: str=''</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3018">[source]</a>
</p>
Returns an [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtissettings) object with all chosen recording and processing settings based on the
......@@ -658,11 +708,11 @@ the [`set_recording_settings()`](https://cosysgit.uantwerpen.be/rtis-software/rt
</p>
<b>callSampleFrequency : <i>int (default = 450000)</i></b>
<p class="attr">
The chosen sample frequency of the call. Must by larger then 160 KHz and smaller then 2 MHz.
The chosen sample frequency of the call. Must be larger than 160 KHz and smaller than 2 MHz.
</p>
<b>callDuration : <i>float (default = 2.5)</i></b>
<p class="attr">
The duration in miliseconds of the call.
The duration in milliseconds of the call.
</p>
<b>callMinimumFrequency : <i>int (default = 25000)</i></b>
<p class="attr">
......@@ -740,7 +790,7 @@ the [`set_recording_settings()`](https://cosysgit.uantwerpen.be/rtis-software/rt
## **set_settings_from_class**
<p class="func-header">
<i>def</i> <b>set_settings_from_class</b>(<i>settings: RTISSettings, applyToDevice: bool=True </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2915">[source]</a>
<i>def</i> <b>set_settings_from_class</b>(<i>settings: RTISSettings, applyToDevice: bool=True </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3221">[source]</a>
</p>
Set the wanted settings from an [`RTISSettings`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtissettings) object. These can be created
......@@ -776,7 +826,7 @@ with the [`get_settings()`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev
## **get_premade_processing_settings_list**
<p class="func-header">
<i>def</i> <b>get_premade_processing_settings_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2949">[source]</a>
<i>def</i> <b>get_premade_processing_settings_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3255">[source]</a>
</p>
Get a list of names of all the available premade settings for processing.
......@@ -800,7 +850,7 @@ Get a list of names of all the available premade settings for processing.
## **get_premade_recording_settings_list**
<p class="func-header">
<i>def</i> <b>get_premade_recording_settings_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2964">[source]</a>
<i>def</i> <b>get_premade_recording_settings_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3270">[source]</a>
</p>
Get a list of names of all the available premade settings for recording.
......@@ -824,7 +874,7 @@ Get a list of names of all the available premade settings for recording.
## **get_microphone_layout_list**
<p class="func-header">
<i>def</i> <b>get_microphone_layout_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2978">[source]</a>
<i>def</i> <b>get_microphone_layout_list</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3285">[source]</a>
</p>
Get a list of names of all the available microphone layouts that are available for recording.
......@@ -848,11 +898,11 @@ Get a list of names of all the available microphone layouts that are available f
## **prepare_processing**
<p class="func-header">
<i>def</i> <b>prepare_processing</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L2992">[source]</a>
<i>def</i> <b>prepare_processing</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3299">[source]</a>
</p>
Start the CUDA workers for looped measurements with processing enabled.
It is not required to run this method for doing processing but it will speed up the workflow
It is not required to run this method for doing processing, but it will speed up the workflow
significantly if doing many processed measurements at a high frequency.
Furthermore, if using the default settings for processing this is enabled already.
......@@ -875,7 +925,7 @@ Furthermore, if using the default settings for processing this is enabled alread
## **unload_processing**
<p class="func-header">
<i>def</i> <b>unload_processing</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3019">[source]</a>
<i>def</i> <b>unload_processing</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3326">[source]</a>
</p>
Stop all CUDA workers.
......@@ -901,7 +951,7 @@ stopped when your script ends.
## **get_raw_measurement**
<p class="func-header">
<i>def</i> <b>get_raw_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3034">[source]</a>
<i>def</i> <b>get_raw_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3341">[source]</a>
</p>
Start an RTIS sonar measurement and return the raw data in an [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtismeasurement) object.
......@@ -930,13 +980,10 @@ This means that it will only record and not perform any processing.
#### Examples
Create a connection, set recording settings and make a raw measurement with passive behaviour.
Create a connection, set recording settings and make a raw measurement with passive behaviour:
```python
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
measurement = rtisdev.get_raw_measurement(True)
......@@ -945,7 +992,7 @@ measurement = rtisdev.get_raw_measurement(True)
## **get_signal_measurement**
<p class="func-header">
<i>def</i> <b>get_signal_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3071">[source]</a>
<i>def</i> <b>get_signal_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3375">[source]</a>
</p>
Start an RTIS sonar measurement and process it with only PDM filtering
......@@ -976,11 +1023,10 @@ have set. But will still use the other chosen recording and processing settings.
#### Examples
Create a connection, set recording and processing settings and make a signal measurement with active behaviour.
Create a connection, set recording and processing settings and make a signal measurement with active behaviour:
```python
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
......@@ -990,7 +1036,7 @@ signal_measurement = rtisdev.get_signal_measurement(True)
## **get_processed_measurement**
<p class="func-header">
<i>def</i> <b>get_processed_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3113">[source]</a>
<i>def</i> <b>get_processed_measurement</b>(<i>behaviour: bool=False</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3416">[source]</a>
</p>
Start an RTIS sonar measurement and process it and return the raw and processed data
......@@ -1019,11 +1065,11 @@ in an [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-
#### Examples
Create a connection, set recording and processing settings and make a processed measurement with active behaviour.
Create a connection, set recording and processing settings and make
a processed measurement with active behaviour:
```python
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
......@@ -1033,7 +1079,7 @@ processed_measurement = rtisdev.get_processed_measurement(True)
## **process_measurement**
<p class="func-header">
<i>def</i> <b>process_measurement</b>(<i>measurement: RTISMeasurement</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3154">[source]</a>
<i>def</i> <b>process_measurement</b>(<i>measurement: RTISMeasurement</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3457">[source]</a>
</p>
Process a previously recorded raw RTIS sonar measurement from a [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtismeasurement) object
......@@ -1063,11 +1109,10 @@ and return same measurement with processed data in a new [`RTISMeasurement`](htt
#### Examples
Create a connection, set recording and processing settings and make a raw measurement with active behaviour.
Then afterwards process it.
Then afterwards process it:
```python
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
......@@ -1078,7 +1123,7 @@ processed_measurement = rtisdev.process_measurement(measurement)
## **set_counter**
<p class="func-header">
<i>def</i> <b>set_counter</b>(<i>newCount: int=0</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3195">[source]</a>
<i>def</i> <b>set_counter</b>(<i>newCount: int=0</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3497">[source]</a>
</p>
Set the internal measurement counter of the sonar hardware.
......@@ -1109,7 +1154,7 @@ Set the internal measurement counter of the sonar hardware.
## **set_behaviour**
<p class="func-header">
<i>def</i> <b>set_behaviour</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3218">[source]</a>
<i>def</i> <b>set_behaviour</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3520">[source]</a>
</p>
Set the behaviour of the sonar hardware to passive or active. This is only necessary if using external
......@@ -1143,7 +1188,7 @@ argument to define the sonar behaviour.
## **get_firmware_version**
<p class="func-header">
<i>def</i> <b>get_firmware_version</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3243">[source]</a>
<i>def</i> <b>get_firmware_version</b>(<i></i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3545">[source]</a>
</p>
Get the firmware version of the internal RTIS firmware used on the device.
......@@ -1167,7 +1212,7 @@ Get the firmware version of the internal RTIS firmware used on the device.
## **create_measure_external_trigger_queue**
<p class="func-header">
<i>def</i> <b>create_measure_external_trigger_queue</b>(<i>dataQueue: Queue </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3258">[source]</a>
<i>def</i> <b>create_measure_external_trigger_queue</b>(<i>dataQueue: Queue </i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3560">[source]</a>
</p>
This will create and return a Multiprocessing Process
......@@ -1187,7 +1232,7 @@ the RTIS Device and afterwards put this measurement on a data queue.
</tr>
<tr class="field">
<th class="field-name"><b>Returns:</b></td>
<td class="field-body" width="100%"><b>th : <i>MeasureExternalTriggerQueueThread</i></b>
<td class="field-body" width="100%"><b>measure_process : <i>MeasureExternalTriggerQueueThread</i></b>
<p class="attr">
Class instance of the Multiprocessing Process super class that can then be started with '.start()' and waited for with <code>.join()</code> for example. It can be closed gracefully with the '.stop_thread()' function. This will also be done automatically when <code>signal.SIGINT</code> (ex. <kbd>CTRL</kbd>+<kbd>C</kbd>) is triggered.
</p></td>
......@@ -1197,19 +1242,16 @@ the RTIS Device and afterwards put this measurement on a data queue.
#### Examples
Create a queue to save the measurement to and assign it to the process.
Create a queue to save the measurement to and assign it to the process:
```python
from multiprocessing import Manager
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
manager = Manager()
dataQueue = manager.Queue()
measure_thread = rtisdev.create_measure_external_trigger_queue(dataQueue)
measure_thread.start()
measure_thread.join()
......@@ -1218,7 +1260,7 @@ measure_thread.join()
## **create_measure_external_trigger_callback**
<p class="func-header">
<i>def</i> <b>create_measure_external_trigger_callback</b>(<i>callback: Callable[[ RTISMeasurement], any]</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3302">[source]</a>
<i>def</i> <b>create_measure_external_trigger_callback</b>(<i>callback: Callable[[ RTISMeasurement], any]</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3624">[source]</a>
</p>
This will create and return a Multiprocessing Process
......@@ -1238,7 +1280,7 @@ the RTIS Device and afterwards put this measurement on a data queue.
</tr>
<tr class="field">
<th class="field-name"><b>Returns:</b></td>
<td class="field-body" width="100%"><b>th : <i>MeasureExternalTriggerCallbackThread</i></b>
<td class="field-body" width="100%"><b>measure_process : <i>MeasureExternalTriggerCallbackThread</i></b>
<p class="attr">
Class instance of the Multiprocessing Process super class that can then be started with <code>.start()</code> and waited for with <code>.join()</code> for example. It can be closed gracefully with the <code>.stop_thread()</code> function. This will also be done automatically when <em>signal.SIGINT</em> (ex. <kbd>CTRL</kbd>+<kbd>C</kbd>) is triggered.
</p></td>
......@@ -1248,26 +1290,22 @@ the RTIS Device and afterwards put this measurement on a data queue.
#### Examples
Create a callback to save the measurement to disk.
Create a callback to save the measurement to disk:
```python
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
index = 0
def save_callback(measurement=None):
if measurement != None:
if measurement is not None :
if measurement.rawData is not None:
data_sonar = measurement.rawData.tobytes()
file_handle_data = open(str(index) + ".bin","wb")
file_handle_data.write(data_sonar)
file_handle_data.close()
index = index + 1
measure_thread = rtisdev.create_measure_external_trigger_callback(save_callback)
measure_thread.start()
measure_thread.join()
......@@ -1276,10 +1314,10 @@ measure_thread.join()
## **create_processing_workers**
<p class="func-header">
<i>def</i> <b>create_processing_workers</b>(<i>workerCount: int, inputQueue: Queue, outputQueue: Queue</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3356">[source]</a>
<i>def</i> <b>create_processing_workers</b>(<i>workerCount: int, inputQueue: Queue, outputQueue: Queue</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3697">[source]</a>
</p>
This will create and return a Multiprocessing Pool that will generating a chosen amount of processing
This will create and return a Multiprocessing Pool that will generate a chosen amount of processing
workers to handle incoming [`RTISMeasurement`](https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/wikis/home#rtismeasurement) objects on the input Multiprocessing Queue
and after processing place them on the output Multiprocessing Queue.
......@@ -1318,42 +1356,37 @@ potential crash of RTIS Dev!
#### Examples
Create the data queues, setup the worker pool with 4 workers, generate some measurements and afterwards parse
Create the data queues, set up the worker pool with 4 workers, generate some measurements and afterwards parse
all these measurements by getting them from the output queue.
Once the work is done, terminate the workers gracefully.
Once the work is done, terminate the workers gracefully:
```python
from multiprocessing import Manager
import rtisdev
rtisdev.open_connection()
rtisdev.set_recording_settings(premade="default_25_50")
rtisdev.set_processing_settings(premade="2D_5m_181")
manager = Manager()
inputQueue = manager.Queue()
outputQueue = manager.Queue()
workersPool = rtisdev.create_processing_workers(4, inputQueue, outputQueue)
for measurement_index in range(0, 30):
measurement = rtisdev.get_raw_measurement()
inputQueue.put(measurement)
for measurement_index in range(0, 30):
measurement = outputQueue.get()
workersPool.terminate()
```
## **toggle_amplifier**
<p class="func-header">
<i>def</i> <b>toggle_amplifier</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3429">[source]</a>
<i>def</i> <b>toggle_amplifier</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3763">[source]</a>
</p>
Enable/disable the high voltage amplifier's step up controller.
It is enabled by default so has to be manually disabled if wanted. This will save on power usage and heat production.
It is enabled by default so has to be manually disabled if wanted.
This will save on power usage and heat production.
<table class="docutils field-list field-table" frame="void" rules="none">
<col class="field-name" />
......@@ -1363,7 +1396,7 @@ It is enabled by default so has to be manually disabled if wanted. This will sav
<th class="field-name"><b>Parameters:</b></td>
<td class="field-body" width="100%"><b>mode : <i>bool</i></b>
<p class="attr">
the amplifier mode chosen. <code>False</code> = disable <code>True</code> = enable
the amplifier mode chosen. <code>False</code> = disable, <code>True</code> = enable
</p></td>
</tr>
<tr class="field">
......@@ -1381,7 +1414,7 @@ It is enabled by default so has to be manually disabled if wanted. This will sav
## **toggle_external_triggers**
<p class="func-header">
<i>def</i> <b>toggle_external_triggers</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3452">[source]</a>
<i>def</i> <b>toggle_external_triggers</b>(<i>mode: bool</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3785">[source]</a>
</p>
Enable/disable external triggers being able to start a measurement on the RTIS device.
......@@ -1395,7 +1428,7 @@ They are disabled by default so have to be manually enabled.
<th class="field-name"><b>Parameters:</b></td>
<td class="field-body" width="100%"><b>mode : <i>bool</i></b>
<p class="attr">
the external trigger mode chosen. <code>False</code> = disable <code>True</code> = enable
the external trigger mode chosen.<code>False</code> = disable, <code>True</code> = enable
</p></td>
</tr>
<tr class="field">
......@@ -1413,7 +1446,7 @@ They are disabled by default so have to be manually enabled.
## **reset_device**
<p class="func-header">
<i>def</i> <b>reset_device</b>(<i>stm32pin: int=7</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3475">[source]</a>
<i>def</i> <b>reset_device</b>(<i>stm32pin: int=7</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3806">[source]</a>
</p>
The function to reset the RTIS device hardware.
......@@ -1444,7 +1477,7 @@ The function to reset the RTIS device hardware.
## **set_log_mode**
<p class="func-header">
<i>def</i> <b>set_log_mode</b>(<i>mode: int</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3523">[source]</a>
<i>def</i> <b>set_log_mode</b>(<i>mode: int</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3852">[source]</a>
</p>
The function to set the logging level of the RTIS Dev module.
......@@ -1457,7 +1490,7 @@ The function to set the logging level of the RTIS Dev module.
<th class="field-name"><b>Parameters:</b></td>
<td class="field-body" width="100%"><b>mode : <i>int</i></b>
<p class="attr">
Disable or configure log the level. 0 = off 1 = only warnings and errors 2(default) = includes info 3 = includes debug
Disable or configure log the level. 0 = off, 1 = only warnings and errors, 2(default) = includes info, 3 = includes debug
</p></td>
</tr>
</tbody>
......@@ -1468,7 +1501,7 @@ The function to set the logging level of the RTIS Dev module.
## **set_custom_logger**
<p class="func-header">
<i>def</i> <b>set_custom_logger</b>(<i>customLogger: logging.Logger</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3554">[source]</a>
<i>def</i> <b>set_custom_logger</b>(<i>customLogger: logging.Logger</i>) <a class="src-href" target="_blank" href="https://cosysgit.uantwerpen.be/rtis-software/rtisdev/-/blob/master/rtisdev/RTISDev.py#L3880">[source]</a>
</p>
The function to set a custom logger to be used by RTIS Dev.
......